To ensure that the Mineral water Plants provide best quality of product the aspect of turnkey system has been adopted by Zixom Plast. Along with this technique and the best materials from Zixom Plast, then plants produce 100% high quality products. Zixom Plast is the best in providing the water plants with various accessories which are involved in the treatment of water. Also, we manufacture the accessories which are needed for execution of the process of disinfection, pre-treatment and filtration. We have specialization in preparing those projects which have all the aspects of water treatment included
Raw Water Storage Tank: It is used for storing raw water.
Raw Water Transfer Pump: It is used for feeding raw water in the pre-treatment of RO plant.
Multigrade Sand Filter: A set of Multigrade Pressure Sand Filter (MSF) unit in SS construction is provided for filtering raw water that is passed through a Multigrade Sand Filter (MSF) unit to remove suspended matters and turbidity present in the raw water. It is a SS vertical pressure vessel and externally this unit is fitted with Multiport valve. The unit is charged with filtering media. When raw water is passed through this filter bed, the suspended matters and turbidity gets removed.
Activated Carbon Filter: A set of Activated Carbon Filter (ACF) unit in SS construction is provided to filter raw water. Raw water is passed through an Activated Carbon Filter (ACF) unit to filter raw water. Activated Carbon Filter (ACF) unit is installed for passing raw water to remove colour and odour present in the raw water. It is a SS vertical pressure vessel and this unit is externally fitted with Multiport valve. This unit is charged with Activated Carbon media. When raw water is passed through this filter bed, colour & odour gets removed.
Anti-Scalant Chemical Dosing: A number of Anti-Scalant Chemical Dosing with Dosing Tank is used for preventing the precipitation in the membrane and hence, it enhances the life of RO Membrances.
Micron Cartridge Filters: These filters are complete with corrosion proof housing suitable for brackish water conditions. Cartridges are rated at 10 microns and 5 microns pore size.
High Pressure Pump: A high pressure pump with motor is provided with reverse osmosis system. This pump is of Multi stage Centrifugal type and increases pressure required for the RO system.
Desalination Reverse Osmosis System: Through this system, total dissolved solids get removed at the rejection rate of 90% to 97%. In the shape of permit, the desirable quality of water is obtained along with draining out of the waste water as rejected dissolved solids.
pH Chemical Dosing: This dosing treatment is used for final process of treatment in which pH value is corrected through the chemical dosing process.
Ozonator: Ozonator involves treating product water obtained through above process for the removal of micro-organisms present in the treated mineral water.
Treated water storage tank: Storage of final water is done in the stainless steel tank.
Filling section: Finally, the water is packed in food grade pet bottles of respective sizes through semi-automatic filling machine in an isolated section involving absolute hygiene.
Quality Inspection: As the bottles get filled, each bottle is taken through the intensive quality check measures like white light inspection before they are dispatched.
Packaging: Then, these bottles are taken for final bulk packaging in cartons etc that are ready for despatch in the market.
POWER REQUIREMENTS OF THE MINERAL WATER PLANTS MACHINARY
|Sr.No.||Type of Machinery||500 LPH||1000 LPH||1500 LPH||2000 LPH||3000 LPH||Phase|
|1||Raw Water Pump||1 HP||1 Â½ HP||1 Â½ HP||2 HP||2 HP||III|
|2||High Pressure Pump||2 HP||3 HP||3 HP||5 HP||5 HP||III|
|3||Transfer Pump (RO to Post Treatment Plant)||Â½ HP||Â½ HP||Â½ HP||Â½ HP||Â½ HP||I|
|4||Ozone Circulation Pump||Â½ HP||Â½ HP||Â½ HP||Â½ HP||Â½ HP||I|
|5||Ozone Water Transfer Pump||1 HP||1 HP||1 HP||1 HP||1 HP||I|
|6||Pouch Packing Machine||1 HP||1 HP||1 HP||1 HP||1 HP||I|
|7||Bottle Filing and Washing Machine Fully Auto||6 HP||6 HP||6 HP||7 HP||7 HP||III|
|8||Bottle Filing and Washing Machine Semi Auto||3 HP||3 HP||3 HP||3 HP||3 HP||III|
|9||Jar Washing Machine||2 HP||2 HP||2 HP||2 HP||2 HP||I|
|10||Chilling Machine||5 HP||10 HP||10 HP||10 HP||10 HP||III|
|11||Blow Moulding M/c||22 HP||22 HP||22 HP||22 HP||22 HP||III|
1. The requirement for the Phase I is that of 4 to 5 HP.
2. The Phase III requirement is that of 14 HP.
3. The requirements for the laboratory is that of Phase I for the connection no 20. The connection has 15 amp sockets.